CSM is very resistant to attack by oxygen and ozone, and properly compounded products show excellent weathering resistance. High tensile strength is characteristic of hypalon vulcanizates, which do not need the use of highly reinforcing fillers for good tensile properties. Compounds can be formulated for excellent abrasion resistant and for brittle temperatures as low as -60°C (-76°F). Hypalon vulcanizates show excellent resistant to corrosive chemicals. They have excellent electrical properties. They have good heat resistance with an “EE” rating by ASTM D2000 being obtainable. They can also be compounded for good flame resistance.
If required, we supply technical rubbers in the form of semi-finished or finished products. Most of the standard technical rubbers in our range are permanently in stock, so we can offer not only very short delivery or production times, but also the possibility of producing atypical variants from a single piece.
Delivery times: It mainly depends on the batch size and the complexity of products. Our standard delivery time is usually no more than one week of placing the order. Given our warehouse stock we are able to offer production on short notice in emergency situations.
CSM Rubber sheet:
| SPECIFIC GRAVITY | HARDNESS (±5) |
TENSILE STRENGHT (MIN) | ELONGATION at BREAK (MIN) | OIL SWELL in ASTM OIL 903 | COMPRESSION SET 70 °C/22 h |
TEMPERATURE RANGE | |
| gm / cm3 | Shore A | kg / cm2 | % | % | % | °C | |
| HN | 1.40 | 60 | 100 | 400 | – | 40 | -35 – +140 |
| STANDARD SIZE | COLOUR | ||||
| WIDHT: 1.2 / 1.4 / 1.5 Mtr | |||||
| LENGHT: 10 Mtr | |||||
| NOTE | 1). One side or both side smooth or fabric finish can be supplied. |
| 2). Specifications are subject to change without notice. |